Fiber microsilica gel code GLP-4044

Fiber microsilica gel code GLP-4044

Fiber microsilica gel code GLP-4044 product of Parsman Chemical is a multi-purpose and efficient product that, in addition to improving the physical and mechanical characteristics of hardened concrete (compressive, tensile, bending and durability), also leads to an increase in the efficiency of fresh concrete. This product is provided using special preservative additives in the form of a gel with a combination of microsilica, fibers and a strong water reducer with appropriate viscosity, which is used as a component to improve the mechanical and rheological characteristics of concrete.

Technical specifications of fibrous microsilica gel code GLP-4044:

The effective ingredient Microsilica (silica foam)
Appearance   smooth gel
Color   Dark gray
Density   1.35 ± 0.05 g/cm3
pH 5-7
The percentage of dry matter  40%
The amount of chlorine  without chloride
The recommended amount of consumption 3 to 15  percent of cement weight for normal use

 

Description

Fiber microsilica gel code GLP-4044 product of Parsman Chemical is a multi-purpose and efficient product that, in addition to improving the physical and mechanical characteristics of hardened concrete (compressive, tensile, bending and durability), also leads to an increase in the efficiency of fresh concrete. This product is provided using special preservative admixturs in the form of a gel with a combination of microsilica, fibers and a strong water reducer with appropriate viscosity, which is used as a component to improve the mechanical and rheological characteristics of concrete.
 

Application cases of microsilica gel with fibers code GLP-4044:

Precast concrete elements, industrial floors and concrete decks of bridges, self-compacting concrete (SCC), structures and elements exposed to melting and freezing cycles, high durability concretes against chloride ion penetration and sulfate attacks, concretes with high abrasion resistance such as surfaces Concrete exposed to the load of vehicle traffic, high strength and performance concrete (HPC), bulk concreting (hydration heat reduction), low permeability and waterproof concrete such as tanks, tunnels, dams, pools and underground structures exposed to hydrostatic water pressure.

 

Safety matters

Before using the product, please read the safety information sheet carefully or read the safety instructions on the package.


Technical services

The technical department of Parsman Chemical Construction is always available to help you in the correct and optimal use of products.

 

Tips for using microsilica gel with fibers code GLP-4044:

It is used to produce concrete with high durability and strength, especially in sections where the transportation distance is significant. This product follows a variety of concrete mixing designs with different categories of workability, with technical advantages, durability and environmental conditions, according to the European standard EN 206, outstanding economy. After complete mixing, it is recommended to add other components to the concrete. Also, if it is used in a concrete truck, it should be mixed uniformly for at least 5 minutes. Considering the significant consumption of microsilica gel, it is recommended to reduce the amount of water in it from the water in the concrete mix, considering the percentage of dry ingredients of the product.

 

This product is compatible with the following admixtures and materials:

•Concrete retarders: Parsman Chemical R-200

•Concrete Precipitators: Parsman Chemical AX-104

•Expanding admixtures

•Shrinkage reduction admixtures

•Processing materials for exposed concrete

•Common mold oil

Reviews

There are no reviews yet.

Be the first to review “Fiber microsilica gel code GLP-4044”

Your email address will not be published. Required fields are marked *