Ready-made grout code GX-1001

Title	Feature
appearance	powder
color	Gray
Density	35.2 ± 0.05 g/cm3
Initial expansion start time	15 minutes
Expansion rate	2-4
1-day resistance in 15% water content,	420 kg/cm2
3-day resistance in 15% water content,	470 kg/cm2
7-day resistance in 15% water content,	570 kg/cm2
28-day resistance in 15% water content,	650 kg/cm2

Description

The ready-made grout code GX-1001 of Parsman Chemical products is a mineral-based product that prevents shrinkage and cracking of the section with its inherent expansion properties. After pouring, processing and hardening, this product has unique characteristics in terms of physical, mechanical (compressive, bending resistance) and durability. This special expansion grout is formulated using special expansion and mineral admixtures and is presented in the form of a powder with certain granularity.

Application

•Installation of foundation base plates for metal buildings

•Grouting the plates of the base plate of the transmission rails

•Installation and stabilization of vibrating industrial machines

•Installation of prefabricated elements (beams and columns)

•Filling the holes left by the bolt

•Minor and general building repairs

•Structural filling of holes, holes and pits

•Injection of sheath of pre-tensioned cables

•Planting rebar and bolt anchor

•Grouting of bridge foundations

•Concrete reinforcements

•nstallation of power towers

Usage tips

To prepare the grout, first pour the specified amount of water into a clean plastic container and slowly add the GX-1001 product to it and stir continuously. It is recommended to use a mixer for this. Stirring for 5 to 6 minutes is enough. In the end, the desired grout has achieved the required efficiency. The prepared mixture should be used within 30 minutes. Grouting should be done inside the mold without stopping. By slowly hitting the rod, you can ensure the uniform distribution of the grout. It is necessary to choose the amount of water used between 0.12 and 0.16 according to consistency, workability and resistance. It is recommended to check the desired substrate for contamination before starting grouting. The surface must be completely free of dust, dirt, grease, oil, paint, plaster or any non-solid coating. Contact surfaces must be moist. The ambient temperature during execution should be between +5 and +35 degrees Celsius.

This product is compatible with the following admixtures and materials:

•Retardant admixtures: R200 ParsmanChemical

•Accelerating admixtures: AX-104 ParsmanChemical

•Normal mold oil

Reviews

There are no reviews yet.

Be the first to review “Ready-made grout code GX-1001”

parsmanchemical

+9821-75918

parsmanchemical

Ready-made grout code GX-1001