Sullry code PSH-450

Sullry code PSH-450

Sullry code PSH-450 product of Parsman Chemical is specially designed for use in concrete and non-reinforced parts. In addition to improving the strength and durability characteristics, this product causes the concrete accelerator. Therefore, the need to use concrete accelerator agents is eliminated. This product is used as a modifier component of concrete rheology characteristics to obtain high-strength concrete with minimum permeability. The distinctive feature of this product is to accelerate the process of gaining concrete strength without negatively affecting the performance.

Technical specifications of sullry code •PSH-450

The effective ingredient Microsilica (silica foam)
Appearance   thin slurry
Color   Dark gray
Density   1.30 ± 0.05 g/cm3
pH 6-8
The percentage of dry matter  45%
The amount of chlorine  without chloride
The recommended amount of consumption 4 to 20 percent of cement weight for normal use

 

Description

Sullry code PSH-450 product of Parsman Chemical is specially designed for use in concrete and non-reinforced parts. In addition to improving the strength and durability characteristics, this product causes the concrete acclerator. Therefore, the need to use concrete accelerator agents is eliminated. This product is used as a modifier component of concrete rheology characteristics to obtain high-strength concrete with minimum permeability. The distinctive feature of this product is to accelerate the process of gaining concrete strength without negatively affecting the performance.

 

Application cases of microsilica sullry code PSH-450:

Self-compacting concretes (SCC), high-strength concretes, high-durability concretes against chloride ion penetration and sulfate attacks, high-wear concretes such as concrete surfaces exposed to vehicular traffic loads, high-performance concretes (HPC), bulk concrete (reduction of heat of hydration), low-permeability and waterproof concretes such as tanks, tunnels and underground structures exposed to hydrostatic water pressure.

Safety matters:

Before using the product, please read the safety information sheet carefully or read the safety instructions on the package.
Technical servicesThe technical department of Parsman Chemical Construction is always available to help you in the correct and optimal use of products.


Tips for using PSH-450 microsilica sullry:

PSH-450 is used to produce concrete with high durability and strength. This product follows a variety of concrete mixing schemes with different categories of workability, durability and environmental conditions, in accordance with the European standard EN 206, with outstanding technical and economic advantages.


It is recommended to add PSH-450 to concrete after mixing other components. Also, if it is used in a concrete truck, it should be mixed uniformly for at least 5 minutes. Considering the significant amount of microsilica gel consumption, it is recommended to reduce the amount of water in the concrete mix according to the percentage of dry ingredients of the product.


This product is compatible with the following admixtures and materials:


•Super-plasticizer and concrete super-plasticizer

•Concrete Precipitators: ParsmanChemical AX-104

•Expanding admixtures

•Shrinkage reduction admixtures

•Processing materials for exposed concrete

•Normal mold oil

 

Reviews

There are no reviews yet.

Be the first to review “Sullry code PSH-450”

Your email address will not be published. Required fields are marked *