Description
Parsman Chemical GX-1000 ready-made grout is a non-shrinking mineral-based product that, after hardening, has unique characteristics in terms of physical, mechanical (compressive, flexural strength) and durability of concrete. This product is formulated using special expansion and mineral additives and is presented in the form of a powder with certain granularity.
•Installation of foundation base plates for metal buildings
•Grouting the plates of the base plate of the transmission rails
•Installation and stabilization of vibrating industrial machines
•Installation of prefabricated elements (beams and columns)
•Filling the holes left by the boltMinor and general building repairs
•Structural filling of holes, holes and pits
•Injection of sheath of pre-tensioned cables
•Planting rebar and bolt anchor
•Grouting of bridge foundations
•Concrete reinforcements
•Installation of power towers
Tips for use:
To prepare the grout, first pour the specified amount of water in a clean plastic container, slowly add the product to it and stir continuously. It is recommended to use a mixer for this. Stirring for 5 to 6 minutes is enough. In the end, the desired grout has achieved the required efficiency. The prepared mixture should be used within 30 minutes. Grouting should be done inside the mold without stopping. By slowly hitting the rod, you can ensure the distribution of the grout.
The amount of water used should be chosen according to consistency, workability and resistance between the suggested range of 0.13 to 0.18.
It is recommended to check the desired substrate for contamination before starting grouting. The surface must be completely free of dust, dirt, grease, oil, paint, plaster or any non-solid coating. Contact surfaces must be moist. The ambient temperature during execution should be between +5 and +35 degrees Celsius.
It is recommended to check the desired substrate for contamination before starting grouting. The surface must be completely free of dust, dirt, grease, oil, paint, plaster or any non-solid coating. Contact surfaces must be moist. The ambient temperature during execution should be between +5 and +35 degrees Celsius.
This product is compatible with the following admixtures and materials:
•plasticizer and super-plasticizer admixtures of the Fluentis category
•Retardant admixtures: R200 Parsman Chemical
•Accelerating admixtures: Parsman Chemical AX-104
•Normal mold oil
packing
Parsman Chemical’s GX-1000 product is supplied in 25 kg bags.
Reviews
There are no reviews yet.