parsmanchemical

+9821-75918

parsmanchemical

Subgroup of ParsmanGroup
Subgroup of ParsmanGroup

Sullry code PSA-507

  2. Sullry code PSA-507

Sullry code PSA-507

PSA-507 sullry, produced by Parsman Chemical, is a very efficient product that, in addition to improving physical and mechanical characteristics (strength and durability), gives concrete accelerator properties. Therefore, it completely eliminates the need for separate use of concrete accelerator agents. This product is used as a modifier component of concrete rheology characteristics to obtain high-strength concrete with minimum permeability. The distinctive feature of this product is to accelerate the process of gaining concrete strength without negatively affecting the performance.

Technical specifications of PSA-507 code sullry

The effective ingredient Microsilica (silica foam)
Appearance   thin slurry
Color   Dark gray
Density   1.35 ± 0.05 g/cm3
pH 6-8
The percentage of dry matter  50%
The amount of chlorine  without chloride
The recommended amount of consumption 4 to 20 percent of cement weight for normal use

 

افزودنی های بتن پارسمان شیمی

Categories ,

Description

PSA-507 sullry, produced by Parsman Chemical, is a very efficient product that, in addition to improving physical and mechanical characteristics (strength and durability), gives concrete accelerator properties. Therefore, it completely eliminates the need for separate use of concrete accelerator agents. This product is used as a modifier of concrete rheology characteristics to obtain high-strength concrete with minimal permeability.
 
The distinctive feature of this product is to accelerate the process of gaining concrete strength without negatively affecting the performance.
 

Application cases of microsilica sullry code PSA-507:

Self-compacting concretes (SCC), high-strength concretes, high-durability concretes against chloride ion penetration and sulfate attacks, high-wear concretes such as concrete surfaces exposed to vehicular traffic loads, high-performance concretes (HPC), bulk concrete (reduction of heat of hydration), low-permeability and waterproof concretes such as tanks, tunnels and underground structures exposed to hydrostatic water pressure

Safety matters:

Before using the product, please read the safety information sheet carefully or read the safety instructions on the package.

 

Technical services:

The technical department of Parsman Chemical Construction is always available to help you in the correct and optimal use of products.

 

Tips for using PSA-507 microsilica sullry:

Parsman Chemical PSA-507 is used to produce concrete with high durability and strength. This product follows a variety of concrete mixing schemes with different categories of workability, durability and environmental conditions, in accordance with the European standard EN 206, with outstanding technical and economic advantages. It is recommended to add Parsman Chemical PSA-507 to concrete after complete mixing of other components. Also, if it is used in a concrete truck, it should be mixed uniformly for at least 5 minutes. Considering the significant amount of microsilica gel consumption, it is recommended to reduce the amount of water in the concrete mix according to the percentage of dry ingredients of the product.

 

This product is compatible with the following admixtures and materials:

 

•Super-plasticizer and concrete super-plasticizer

•Concrete Precipitators: Parsman Chemical AX-104

•Expanding admixtures

•Shrinkage reduction admixtures

•Processing materials for exposed concrete

•Normal mold oil

Download Catalog

Reviews

There are no reviews yet.

Be the first to review “Sullry code PSA-507”

Your email address will not be published. Required fields are marked *

Related products