Description
Waterproofing agent code SLW-400 is designed to obtain a waterproof concrete system so that the active chemicals in the formulation of these products, while making the concrete hydrophobic and reducing capillary absorption, with free lime and moisture in the capillary channels and internal pores of the paste. Cement combines and forms insoluble crystalline complexes. These insoluble crystals block the capillary pores as well as the microshrinkage cracks inside the concrete to prevent further water penetration, even under pressure.
Application cases of the waterproofing agent code SLW-400:
•Watertight concrete for tanks, water treatment plants, water transfer channels, etc.
•Concrete foundations, walls and columns exposed to water.
•High durability and impervious concretes against chloride ions and sulfate attacks.
•Concrete with low permeability such as reservoirs, tunnels, dams, pools and underground structures exposed to hydrostatic water pressure.
•Precast waterproofing components such as piles, beams and columns.
•Structures and elements exposed to melting and freezing cycles.
•Concretes with high abrasion resistance, such as concrete surfaces exposed to vehicle traffic loads.
Safety matters
Before using the product, please read the safety information sheet carefully or read the safety instructions on the package.
Technical services
The technical department of Parsman Chemical Construction is always available to help you in the correct and optimal use of products.
Tips for using waterproofing agent code SLW-400 FineGel GLW-500 is used to produce impermeable concrete with high strength and durability. This product follows a variety of concrete mixing schemes with different categories of workability, durability and environmental conditions, in accordance with the European standard EN 206, with outstanding technical and economic advantages.
It is recommended to add FineGel GLW-500 to concrete after complete mixing of other components. Also, if it is used in a concrete truck, it should be mixed uniformly for at least 5 minutes. Considering the dosage and the ability to increase the efficiency of this product, it is recommended to reduce the amount of water in the concrete mix based on the percentage of dry materials.
This product is compatible with the following admixtures and materials:
•Super-plasticizer and super-plasticizer admixtures of the Fluentis category
•Concrete retarders: Parsman Chemical R-200
•Concrete Precipitators: Parsman Chemical AX-104
•Expanding admixtures
•Shrinkage reduction admixtures
•Processing materials for exposed concrete
•Common mold oil
Reviews
There are no reviews yet.