Fibrous sulrry code SLP-5045

Fibrous sulrry code SLP-5045

SLP-5045 fibrous slurry product of Parsman Chemical is a microsilica-based product that improves physical and mechanical characteristics (compressive, bending and tensile strength) and durability of concrete. This product is presented as a suspension of water microsilica powder and fibers with suitable viscosity using special preservative admixtures.

Technical specifications of fibrous sulrry code SLP-5045

The effective ingredient Microsilica (silica foam)
Appearance   thin slurry
Color   Dark gray
Density   1.35 ± 0.05 g/cm3
pH 6-8
The percentage of dry matter  50%
The amount of chlorine  without chloride
The recommended amount of consumption 3 to 15 percent of cement weight for normal use

 

Description

SLP-5045 fibrous slurry product of Parsman Chemical is a product based on microsilica that improves physical and mechanical characteristics (compressive, bending and tensile strength) and durability of concrete. This product is presented as a suspension of water microsilica powder and fibers with suitable viscosity using special preservative admixtures.
 
Application cases of fibrous sulrry code SLP-5045:
 
Precast concrete elements, industrial floors and concrete bridge decks, self-compacting concretes (SCC), structures and elements exposed to melting and freezing cycles, high durability concretes against chloride ion penetration and sulfate attacks, concretes with high abrasion resistance such as concrete surfaces Exposed to loads, vehicular traffic, high strength and performance concretes (HPC), bulk concreting (hydration heat reduction), low permeability and watertight concretes such as tanks, tunnels, dams, pools and underground structures exposed to hydrostatic water pressure
 
Safety matters:
Before using the product, please read the safety information sheet carefully or read the safety instructions on the package.
 
Technical services:
The technical department of Parsman Chemical Construction is always available to help you in the correct and optimal use of products.
 
Tips for using SLP-5045 fibrous sulrry:
It is used to produce concrete with high durability and strength, especially in conditions where the transportation distance is significant. This product follows a variety of concrete mixing designs with different categories of performance, durability and environmental conditions according to the European standard EN 206, with outstanding technical and economic advantages. It is recommended to add Parsman Chemical SL-5045 with a portion of concrete mixing water to other concrete compounds. Also, if using in a concrete truck, mix uniformly for at least 5 minutes. Considering the significant consumption of microsilica slurry, it is recommended to modify the concrete mix water according to the percentage of dry materials of this product and reduce the concrete mix water. It is recommended to mix the contents of the container well before consumption.
 
This product is compatible with the following admixtures and materials:
•Super-plasticizer and concrete super-plasticizer
•Concrete retarders: Parsman Chemical R-200
•Concrete Precipitators: Parsman Chemical AX-104
•Expanding admixtures
•Shrinkage reduction admixtures
•Processing materials for exposed concrete
•Common mold oil
 
 
 

Reviews

There are no reviews yet.

Be the first to review “Fibrous sulrry code SLP-5045”

Your email address will not be published. Required fields are marked *